All Categories

  • All Categories
  • Accessories
  • Mods/Batteries
  • New
  • Tanks/Atomizers
  • Vape Kit
  • Vaporizers

Steam Crave Hadron Pro DNA 250C Mod 400W

  • $215.09
  • Ex Tax: $215.09
  • Product Code: M00000361
  • Availability: In Stock

Steam Crave Hadron Pro DNA 250C ModBrand: Steam CraveUnit: setType: Box ModNet Weight: 416.9(g)The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.INTRODUCTIONSteam Crave Hadron Pro Mod has a FullyMax 4s 1600mAh 30C Li-Po battery pack, not powered by ordinary Li-ion batteries, making it the first DNA 4s Li-Po Mod...

Available Options

Steam Crave Hadron Pro DNA 250C Mod

  • Brand: Steam Crave
  • Unit: set
  • Type: Box Mod
  • Net Weight: 416.9(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Steam Crave Hadron Pro Mod has a FullyMax 4s 1600mAh 30C Li-Po battery pack, not powered by ordinary Li-ion batteries, making it the first DNA 4s Li-Po Mod. The Hadron Pro DNA 250C Mod can support up to The Hadron Pro DNA 250C Mod can support a maximum output power of 400W, which is mind-blowing! The built-in DNA 250C chipset from Evolv offers a wide range of operating modes and functions, such as VW, VV, bypass, TC, and TCR modes, as well as preheat and playback functions. All operating data and information can be viewed through the 0.9-inch TFT display. The free Escribe software allows precise control tuning for the Evolv DNA chip, and the Steam Crave Hadron Pro Mod can be paired with all available tanks, aromatic series atomizers, or rebuildable atomizers via the 510 connector.

Features

• Evolv's DNA 250C Chipset

• Watts Boost, Replay Mode, Accurate Temperature Control, Preheat

• Output Mode: VW, VV, TC, TCR, Bypass

• Maximum Output 400W

• Changeable built-in Battery (Li-Po 1600mAh, 4s)

    - Long cycle life

    - Low internal resistance

    - Safety guarantee

    - Stable discharge characteristics

    - High voltage

    - Good safety performance

    - No memory effect

• USB Charging and Firmware Upgrading

    - Firmware Upgrade

    - Built-in Onboard Charger

    - Fast Charging

    - Pass-Through

    - On-The-Go USB

• Multiple Protections

    - Atomizer Protection

    - Low Resistance Protection

    - Short Circuit Protection

    - Overheat Protection

    - Low Voltage Step Down Protection

    - Onboard Reverse Polarity Protection

• 0.9" Full-Color TFT Display Screen

• Detailed configuration is possible through Escribe software

SPECIFICATION
Dimensions:59 x 36.66 x 116.1mm
Weight:416.9G
Battery:LiPO battery included (1600mah, 4s)
Input Voltage:6.0V-16.8V
Battery Voltage:12V-16.8V (3.0V-4.2V, 4s)
Output Voltage:0.2V-16.8V
Power Range:1-400W
Current Range:0.5A-30A
Max Charging Current:3A (2A suggested)
Temperature Range:200°F-600°F
Coil Material supported:Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
Screen Pixel:0.9" (80*160 pixel) full Color TFT
Body Material:Zinc Alloy
Color available:Silver, Gunmetal, Black
PACKAGE LIST

1x Hadron Pro DNA 250C Box Mod (Evolv logo on) (equipped with 1600mAh, 4s Li-po pack)

1x USB Connecting cable

1x User Manual

GUARANTEE

3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

ORDERING TIPS

Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!

Write a review

Note: HTML is not translated!
    Bad           Good